Free Glass Cutting Optimizer
Optimize glass cutting from stock sheets with the least waste. Scored glass has effectively no kerf — Board Beaver packs your panes edge to edge.
No signup. Kerf 0 mm · stock 2000×1000 mm preset — change anything you like.
Example glass cutting optimizer
Sheet 124% waste
Real layout from the sample job below — 1 sheet(s), 24% waste. Your own job is solved the same way.
| Part | Size (mm) | Qty |
|---|---|---|
| Pane | 500 × 400 | 4 |
| Shelf | 600 × 200 | 3 |
| Panel | 300 × 300 | 4 |
Glass Cutting Optimizer FAQ
What kerf should I use for glass?
Scoring and snapping glass removes essentially no material, so kerf 0 is usually right. If you cut differently, set your value.
What glass sheet sizes are there?
Stock sheets vary widely (e.g. 2000×1000 mm up to jumbo 6000×3210 mm). Enter the size your supplier cuts from.
Can it leave clearance around fragile edges?
Set a small kerf/gap value to force spacing between panes if you want cutting clearance.